View 2S4M_1194487.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
THYRISTORS
2S2M, 2S4M
2 A HIGH-SPEED SWITCHING SCR
The 2S2M and 2S4M are P-gate fully diffused mold SCRs with an average on-current of 2 A. The repeat peak off-voltages (and reverse voltages) are 200 V and 400 V.
PACKAGE DRAWING (UNIT: mm)
FEATURES
* This transistor is designed for high-speed switching and is deal for use in commercial frequencies, high-frequency pulse applications, and inverter applications. * This transistor features a small and lightweight package and is easy to handle even on the mounting surface due to its TO-202AA dimensions. Processing of lead wires and heatsink (tablet) using jigs is also possible. * Employs flame-retardant epoxy resin (UL94V-0).
APPLICATIONS
Consumer electronic euipments, ignitors of devices for light indutry, inverter, and solenoid valve drives
Electrode connection <1>Cathode <2>Anode <3>Gate Standard weight: 1.4 *TC test bench-mark
ABSOLUTE MAXIMUM RATINGS (Ta = 25C)
Parameter Non-repetitive peak reverse voltage Non-repetitive peak off-state voltage Repetitive peak reverse voltage Repetitive peak off-voltage Average on-state current Surge on-state current High-frequency peak on-state current Fusing current Critical rate of rise of on-state current Peak gate power dissipation Average gate power dissipation Peak gate forward current Peak gate reverse voltage Junction temperature Storage temperature Symbol VRSM VDSM VRRM VDRM IT(AV) ITSM ITRM it dt dIT/dt PGM PG(AV) IFGM VRGM Tj Tstg
2
2S2M
2S4M
Ratings V V V V A A A A2s A/s W W A V C C
Unit RGK = 1 k RGK = 1 k RGK = 1 k RGK = 1 k
Refer to Figure 6 snd 7.
300 500 300 500 200 400 200 400 2 (Tc = 77C, Single half-wave, = 180) 20 (f = 50 Hz, Sine half-wave, 1 cycle) 15 (Tc = 65C, f = 10 kp.p.s, tp = 10 s) 1.6 (1 mst10 ms) 50 0.5 (f50 Hz, Duty10%) 0.1 0.2 (f50 Hz, Duty10%) 6 -40 to +125 -55 tp +150
Refer to Figure 2. - - - - - - - -
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D13535EJ2V0DS00 (2nf edition) Date Published April 2002 N CP(K) Printed in Japan
(c)
2002 1998
2S2M, 2S4M
ELECTRICAL CHARACTERISTICS (Tj = 25C, RGK = 1 k)
Parameter Symbol Conditions Specifications MIN. Repeat peak off-state current Repetitive peak reverse current On voltage Gate trigger voltage Gate trigger current Gate non-trigger voltage Critical rate of-rise of offstate voltage Holding current Commutating turn-off time IDRM VDM = VDRM Tj = 25C Tj = 125C IRRM VRM = VRRM Tj = 25C Tj = 125C VTM VGT IGT VGD dV/dt Tj = 25C, ITM = 4 A VDM = 6 V, RL = 100 VDM = 6 V, RL = 100 Tj = 125C, VDM = 1 VDRM 2 Tj = 125C, VDM = 2 VDRM 3 - - - 0.2 10 - - - - - - - - TYP. MAX. 10 200 10 200 2.2 0.8 300 - - Unit Remarks
A
- -
A
V V
- Refer to Figure 1. Refer to Figure 9. Refer to Figure 8. - - - -
A
V V V/s
IH Tq
Tj = 25C, VD = 24 V Tj = 125C, IT = 2 A VDM = 2 VDRM, VR = 50 V 3 dV/dt = 10 V/s Tj = 125C, VDM = 2 VDRM 3 ITM = 30 A IG = 5 mA, t1G = 5 s
10 15
mA
s
Turn-on time
Tgt
-
-
2
s
-
Thermal resistance
Rth(j-c) Rth(j-a)
Junction-to-case DC Junction-to-ambient DC
- -
- -
10 75
C/W
Refer to Figure 13.
TYPICAL CHARACTERISTICS (Ta = 25C)
2
Data Sheet D13535EJ2V0DS
2S2M, 2S4M
Data Sheet D13535EJ2V0DS
3
2S2M, 2S4M
4
Data Sheet D13535EJ2V0DS
2S2M, 2S4M
[MEMO]
Data Sheet D13535EJ2V0DS
5
2S2M, 2S4M
* The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of 2S4M

	To Download 2S4M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .